{"product_id":"seeed-studio-sensecap-solar-node-p1-pro-for-meshcore","title":"Seeed Studio SenseCAP Solar Node P1-Pro for MeshCore","description":"\u003cp\u003e\u003cstrong\u003eSeeed Studio SenseCAP Solar Node P1-Pro for MeshCore\u003c\/strong\u003e is a solar-powered outdoor \u003cstrong\u003eMeshCore repeater node\u003c\/strong\u003e built for fixed, low-maintenance, off-grid deployments. It integrates the \u003cstrong\u003eXIAO nRF52840 Plus\u003c\/strong\u003e main controller, the \u003cstrong\u003eWio-SX1262 LoRa module\u003c\/strong\u003e, and the \u003cstrong\u003eXIAO L76K GPS module\u003c\/strong\u003e to deliver long-range communication, precise positioning, and low-power outdoor operation in a fully enclosed solar-powered form factor. This product is best used for \u003cstrong\u003eMeshCore backbone expansion, outdoor repeaters, rooftop relay deployment, farm or campus coverage, and permanent low-maintenance mesh infrastructure\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis page is intentionally optimized for \u003cstrong\u003eMeshCore\u003c\/strong\u003e. If you are more focused on \u003cstrong\u003eMeshtastic\u003c\/strong\u003e, please choose the \u003ca href=\"https:\/\/upenelab.com\/products\/seeed-studio-sensecap-solar-node\"\u003eMeshtastic-compatible version of this product\u003c\/a\u003e instead, because that variant is the better fit for Meshtastic-oriented deployment and setup.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"SenseCAP Solar Node P1-Pro for MeshCore front view\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/0050\/4774\/files\/image-03-700_c81687cb-6fe8-494b-aaf5-bf0a55c63d37.webp?v=1776398385\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-flashed with MeshCore repeater firmware\u003c\/strong\u003e for fixed outdoor backbone deployment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt with XIAO nRF52840 Plus\u003c\/strong\u003e for low-power wireless control.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUses Wio-SX1262 LoRa module\u003c\/strong\u003e for long-range sub-GHz communication.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes XIAO L76K GPS module\u003c\/strong\u003e for location-aware outdoor installation and positioning.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5W solar panel\u003c\/strong\u003e for autonomous outdoor power harvesting.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupports 4 x 18650 batteries\u003c\/strong\u003e, 3350mAh each, for long-duration operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt for long-term outdoor deployment\u003c\/strong\u003e with weather-protected construction.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCan serve as an outdoor repeater or fixed relay node\u003c\/strong\u003e to expand MeshCore coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain Controller\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXIAO nRF52840 Plus, Nordic nRF52840, 64MHz, 256KB RAM, 1MB Flash, 2MB onboard Flash\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoRa Module\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWio-SX1262, up to 22dBm at 862-930MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGPS Module\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXIAO L76K, supports GPS, GLONASS, and Galileo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoRa Antenna\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e868-915MHz, 2dBi rod-shaped rubber antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBluetooth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.0\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolar Panel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 x 18650 batteries, 3350mAh each\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunication Distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 8-9km in open areas\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUSB-C Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5V 1A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWaterproof Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIPX5\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e191.2 x 201.2 x 42.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg alt=\"SenseCAP Solar Node P1-Pro MeshCore version accessories and mounting\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/0050\/4774\/files\/image-04-700_04df6dff-0fb3-4ddf-83fe-561251b0dc5f.webp?v=1776397619\"\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutdoor MeshCore deployments\u003c\/strong\u003e for fixed long-term installations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelay nodes for mesh network expansion\u003c\/strong\u003e across farms, campuses, rooftops, or community grids.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOff-grid communication infrastructure\u003c\/strong\u003e with solar-assisted power.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutdoor adventure, remote field messaging, and emergency backbone nodes\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermanent repeater layer for MeshCore networks\u003c\/strong\u003e where low maintenance matters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIn The Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSenseCAP Solar Node P1-Pro with GPS and battery\u003c\/li\u003e\n  \u003cli\u003eMounting brackets set\u003c\/li\u003e\n  \u003cli\u003e2dBi 868-915MHz rubber rod antenna\u003c\/li\u003e\n  \u003cli\u003eRF cable, RP-SMA male to RF-SMA female, 300mm\u003c\/li\u003e\n  \u003cli\u003eBlack USB Type-C cable\u003c\/li\u003e\n  \u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOther Content\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhy this version is for MeshCore\u003c\/strong\u003e\u003cbr\u003eThis SKU is the \u003cstrong\u003eMeshCore-oriented Solar Node P1-Pro\u003c\/strong\u003e, meant for users who want a ready outdoor repeater or backbone node without needing to redesign a solar enclosure, battery system, or mounting structure. It is especially useful in fixed-area coverage projects where nodes stay deployed for long periods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDeployment direction\u003c\/strong\u003e\u003cbr\u003eFor MeshCore, this product makes the most sense as a \u003cstrong\u003eroof-mounted repeater, farm relay, campus relay, or outdoor fixed backbone node\u003c\/strong\u003e. It is not just a generic LoRa dev board in a box, but a complete solar-powered deployment device intended for real outdoor infrastructure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you prefer Meshtastic\u003c\/strong\u003e\u003cbr\u003eIf your project is more Meshtastic-centered, use the \u003ca href=\"https:\/\/upenelab.com\/products\/seeed-studio-sensecap-solar-node\"\u003eMeshtastic version of this same product\u003c\/a\u003e instead. That version is the better purchase path when your deployment, firmware workflow, and ecosystem are centered around Meshtastic rather than MeshCore.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"SenseCAP Solar Node P1-Pro MeshCore version product details\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/0050\/4774\/files\/image-09-700.webp?v=1776397619\"\u003e\u003c\/p\u003e\n\u003ch2\u003eMeshCore Version Videos\u003c\/h2\u003e\n\u003cp\u003eThese independent videos demonstrate the \u003cstrong\u003eSeeed Studio SenseCAP Solar Node P1-Pro for MeshCore\u003c\/strong\u003e in practical outdoor mesh-network scenarios. They help buyers review the hardware, solar-powered deployment, MeshCore workflow, and real-world operating experience before purchase.\u003c\/p\u003e\n\u003ch3\u003eOZE4HOME: SenseCAP Solar Node P1-Pro MeshCore Demonstration 1\u003c\/h3\u003e\n\u003cp\u003eOZE4HOME's video 1 provides an independent look at the MeshCore version, its setup, and practical field use.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nSC4PSouY2g\" title=\"OZE4HOME SenseCAP Solar Node P1-Pro for MeshCore video 1\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch3\u003eOZE4HOME: SenseCAP Solar Node P1-Pro MeshCore Demonstration 2\u003c\/h3\u003e\n\u003cp\u003eOZE4HOME's video 2 provides an independent look at the MeshCore version, its setup, and practical field use.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/UXXOgtCI4xM\" title=\"OZE4HOME SenseCAP Solar Node P1-Pro for MeshCore video 2\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch3\u003eOZE4HOME: SenseCAP Solar Node P1-Pro MeshCore Demonstration 3\u003c\/h3\u003e\n\u003cp\u003eOZE4HOME's video 3 provides an independent look at the MeshCore version, its setup, and practical field use.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/C3wZ9oAYSxw\" title=\"OZE4HOME SenseCAP Solar Node P1-Pro for MeshCore video 3\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch3\u003eOZE4HOME: SenseCAP Solar Node P1-Pro MeshCore Demonstration 4\u003c\/h3\u003e\n\u003cp\u003eOZE4HOME's video 4 provides an independent look at the MeshCore version, its setup, and practical field use.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/s0yYhpzYBBI\" title=\"OZE4HOME SenseCAP Solar Node P1-Pro for MeshCore video 4\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch3\u003eLucaFox: SenseCAP Solar Node P1-Pro MeshCore Hands-on Video\u003c\/h3\u003e\n\u003cp\u003eLucaFox's video 5 provides an independent look at the MeshCore version, its setup, and practical field use.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Yw50zA6DHdI\" title=\"LucaFox SenseCAP Solar Node P1-Pro for MeshCore video 5\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wiki.seeedstudio.com\/get_started_with_meshcore_solar_node\/\"\u003eSeeed MeshCore getting started guide\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/meshcore.co.uk\/\"\u003eMeshCore official site\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/flasher.meshcore.co.uk\/\"\u003eMeshCore Web Flasher\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wiki.seeedstudio.com\/cn\/meshcore_node_map_solar_node\/\"\u003eSeeed MeshCore node map guide\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/upenelab.com\/products\/seeed-studio-sensecap-solar-node\"\u003eMeshtastic-compatible version of this product\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this the MeshCore version or the Meshtastic version?\u003c\/h3\u003e\n\u003cp\u003eThis SKU is the \u003cstrong\u003eMeshCore version\u003c\/strong\u003e of the SenseCAP Solar Node P1-Pro.\u003c\/p\u003e\n\u003ch3\u003eShould I buy this if I mainly want Meshtastic?\u003c\/h3\u003e\n\u003cp\u003eNo. If your deployment is primarily Meshtastic-focused, go to the \u003ca href=\"https:\/\/upenelab.com\/products\/seeed-studio-sensecap-solar-node\"\u003eMeshtastic-compatible version of this product\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch3\u003eWhat is it best used for in a MeshCore network?\u003c\/h3\u003e\n\u003cp\u003eIt is best used as a \u003cstrong\u003efixed outdoor repeater, rooftop relay, farm relay, campus relay, or permanent low-maintenance backbone node\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eDoes the P1-Pro version include GPS and battery?\u003c\/h3\u003e\n\u003cp\u003eYes. The \u003cstrong\u003eP1-Pro version includes GPS and battery\u003c\/strong\u003e, which is one of the main differences from the simpler P1 variant.\u003c\/p\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":45731421290694,"sku":"Seeed-100023690","price":103.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/0050\/4774\/files\/image-03-700_c81687cb-6fe8-494b-aaf5-bf0a55c63d37.webp?v=1776398385","url":"https:\/\/upenelab.com\/products\/seeed-studio-sensecap-solar-node-p1-pro-for-meshcore","provider":"OpenELAB Technology Ltd.","version":"1.0","type":"link"}